HD Retrovision Wii / Wii U Premium YPbPr Component Cable
- Brand
- HD Retrovision
- SKU:
- CAB006
- UPC:
- 105400110004
- Get the best analog video & audio out of your Wii or Wii U using this high-quality fully shielded cable
- HD Retrovision cables are properly engineered and constructed; don't settle for cheap unshielded cables which result in poor video quality and audio interference issues
- Supports all available Wii & Wii U YPbPr video resolutions up to and including 1080p (see product description below)
- Full coverage 360° shielding prevents audio and video crosstalk (click on photos for more details)
- Proper 75Ω (75 ohm) coaxial cable impedance for optimal video quality (click on photos for more details)
Use these high-quality cables to connect your Wii or Wii U console to the YPbPr component video inputs on your TV or other video equipment. These cables are properly engineered and constructed to deliver the best analog video & audio out of your Wii or Wii U console. The fully shielded design eliminates audio and video crosstalk, while the 75Ω (75 ohm) impedance effectively transmits the full video detail even at 1080p resolutions.
***WARNING*** for Wii consoles running in 480i or 576i modes only:
Certain Virtual Console titles require your TV or monitor to support “240p” (NTSC/60Hz regions) and/or “288p” (PAL/50Hz regions) over its YPbPr input(s) in order to use this product in those scenarios. If this a concern for you, then please test your equipment using HD Retrovision's 240p/288p Compatibility Test prior to purchasing. Some titles allow for overriding this limitation by accessing the Operating Guide via the Wii Remote’s HOME button and then simultaneously pressing Z+A+2 on the Wii Remote & Nunchuk, such that a confirmation *DING* is heard.
Cable Specifications:
∙ Length: 6 feet (1.8 meters) nominal
∙ Impedance: 75Ω (75 ohm) nominal
∙ Shielding: Aluminum Mylar w/ Copper Spiral
∙ RoHS Compliant
Wii Supported Video Standards:
∙ CEA-770.2-D (240p60, 480i60, 480p60)
∙ ITU-R BT.1700 (288p50, 576i50)
Wii U Supported Video Standards:
∙ CEA-770.2-D (480i60, 480p60)
∙ CEA-770.3-E (720p60, 1080i60)
∙ ITU-R BT.1700 (576i50)
∙ SMPTE 274M (1080p60)
*NOTE: "60" implies both 60Hz and 59.94Hz.
“HD Retrovision” and “HDRV” are trademarks, and “HD Retrovision Bringing Retro Gaming Into The High Definition Era” is a registered trademark, of HD Retrovision LLC. All photographs of HD Retrovision products are © HD Retrovision LLC.
7 Reviews Hide Reviews Show Reviews
-
Great clarity
Since the official cables are so hard to come across, these seem to be the best cables available to buy; not had a single problem with them unlike some other cables where I had occasional interference.
-
HD Retrovision Wii Component Cable
A excelent cable which has worked great with my upscaler. Only issue would be that its quite thick so these cables take up a surprising ammount of space if you have a few.
-
HD Retrovision Wii / Wii U Premium YPbPr Component Cable
This cable is the only one you need for your Wii or EON GCHD Mk2 adapter. I use this exclusivley with the GCHD on my modded Gamecube and run the signal into a Retrotink 5x. The image is crystal clear with ZERO interferance, this was not the case with all previous Wii component cables I tried. I would 100% recommend this cable.
-
Nice !
Work as expected, no artifacts, good quality !
-
Give great pictures quality
Give great pictures on my Nintendo Wii.
-
Best Component Cable
Thanks for the delivery to Belarus. Excellent picture on CRT and LCD TV
-
Image quality
Nice quality cable, which gave an excellent picture on my Sony 39 inch LCD TV. Worth spending the extra money, Recommended!