Brook PS3/PS4 to Mega Drive/PC Engine Super Converter

Plug in to Mega drive/PC Engine:

1. Connect the converter to Mega Drive/PC Engine and turn on the gaming console.

2. Connect the PS3/PS4/Switch controller to the Super Converter via standard USB cable, the registration of the controller starts automatically. When the controller LED turns on, the registration is finished.

3. If the controller does not work correctly due to insufficient power, please connect the micro USB port to the 5V/1A Charger by splitter cable.

Turbo Setting

Turbo function available buttons:╳、○、□、△、L1、R1、L2、R2、L3、R3. In the following description, these buttons are referred as FB, the controller will vibrate when setting:

Step 1. Enter the Turbo Setting Mode:

Press Share & PS Key.

Step 2. Choose FB:(EX: ╳ to set turbo function）

Hold down Share, then press ╳.

Step 3. Complete the Turbo Setting Mode:

Release all buttons then press Option.

The controller will vibrate once strongly.

To set another button, repeat Step 2.

Step 4. Exit the Turbo Setting Mode:

Press PS Key to save the settings and exit setting mode.

If it’s not set successfully, please check step 3.

Cancel all turbo settings:

After entering the turbo setting mode by pressing the Share & PS key, press and hold Share + Option, then press the PS Key to clear all settings. This will clear all turbo settings, but will not affect the remap settings.

When all settings are canceled, the controller will vibrate three times strongly.

Each Brook Controller Adapter can only handle one PS3/PS4 controller at a time.

PS3/PS4 controllers connect to the Controller Adapter automatically, but must be connected with a USB cable at first time use for the purpose of registering the controller.

The connector of the PCE cable of this product is MiniDIN-8, and Turbo Grafx 16(Full DIN-8 connector) is not supported.

The Following console are supported:

Turbo Duo 
NEC / Pioneer PAC-N1, N10, PCE-LP1
PC Engine
PC Engine Duo / Duo-R / Duo-RX
SuperGrafx